Wotofo SERPENT SMM RTA is on sale at Urvapin!

Designed by Suck My Mod and WOTOFO, the unique rebuildable tank atomizer Wotofo SERPENT SMM RTA features a unique single coil build deck which is designed to support both forward (leads wrapped over) and reverse (leads wrapped under) coil building.Now Wotofo SERPENT SMM RTA is on sale with comparative price at urvapin. The following are some details.

This rebuildable atomizer tank features a beautiful stainless steel construction with a heat resistant ULTEM wide bore drip tip. ULTEM is a high temperature plastic with a higher melting point significantly compared to Delrin.

Despite its low profile and compact design, the Wotofo SERPENT SMM RTA has 4ml tank capacity which is conveniently refillable through its threaded top fill design. The build deck features a 2 post block design with a total of four terminals to accommodate forward and reverse built coil configurations. The design of the Wotofo SERPENT SMM RTA truly brings out the flavor of your favorite e-Liquid.

Wotofo SERPENT SMM RTAParameters:
510 Threaded
24mm in diameter
4.0ml juice Capacity
Stainless Steel Construction
ULTEM Wide Bore Drip Tip

Wotofo SERPENT SMM RTA Features:
Designed In Collaboration with Suck My Mod
Top Fill Design with Twist Off Cap
Unique Dual Wall Build Decks with Four Holes Post
Allows for Forward and Reverse Coil Builds
Designed for Single Coil Configurations
Large Holes Wick
Deep Juice Well
Direct Airflow to Coil Design
Dual Airflow Slots
Adjustable Airflow Control Ring

Package includes:
1 * Serpent SMM RTA
1 * Screw driver
1 * User Manual
1 * Bag Japanese cotton
1 * Bag spare screws and orings
1 * Bag Spare coils

More details of Wotofo SERPENT SMM RTA please have a look at urvapin.

Best Seller:

Limitless LMC 200W Box Mod New Color Review

As an high-end flagship devices from the American-based company – Limitless Mod Co. This LMC 200W box mod has a lot to offer at a cost that’s very competitive when compared to other similarly-speced devices.Let’s take a look.

When it comes to design, American street culture influence over this LMC box mod is undeniable, evident in its color combo, the plate’s pattern and the feel of it metal exterior. From the outside, the LMC box mod I received is the attention-grabber-“classic-LMCtriangle”. I personally like it very much. This is a very visceral pattern, it carries the element of Stars and Stripes, fire and passion. Not being too bold or overbearing, the other parts pair with the black. The whole design brings a sense of dignity and refined elegance. You can purchase other four colors – new version red, color burst script, metal scratch script, wood burn LMC script triangle at urvepin, the choice is all yours.

Two magnetic plates are imprinted with graffiti-style LMC logos. They look very casual, playful and uber-cool. These two magnetic plates also work as battery covers. They are replaceable. Each of them is down to personal preference.

LMC 200W box mod also implements the uneven coating. Very unique and functional. Such uneven coating gives ruggedness touches and mirrors the latest industrial street art. Also, the uneven coating provides a certain amount of finger smudge resistance. It keeps grease and stain at bay.

The magnetic battery covers(plates) are quite solid to lock two 18650 batteries in. When refilling the batteries, all you need is simply lift to open. Although LMC 200W box mod has a short circuit detection, a low resistance detection, and a overheat(≥80℃ ) detection, we’re still looking forward to see the other upgrades such as explosion relief holes and a micro USB ports added on this device.





Smok Q-BOX 50W Box mod Starter Kit Review

Recently it seems that smoktech released the newest mini box starter kit Q-BOX,so today let’s check this mini vape kit. This mini vape kit have five fashionable colors available, with compact and mini size. It is so easy to carry and friendly-pocket.

Package of Q-BOX mod:
1*Qbox mod
1*TFV8 baby tank(3.0ml)(EU version:2.0ml)
1*V8 baby M2 dual core(pre-installed)
1*V8 baby M2 0.25ohm dual core
1*USB cable
1*User manual
1*Spare parts

Features of Q-BOX mod:
Material:zinc alloy
Colors:black, silver, purple, gold, rainbow
Battery capacity:1600mAh
Output range:1-50W
Working voltage:0.1-9.0V
Standby current:<500uA
Resistance range:0.1-3.0ohm(VW mode)/0.06-3.0ohm(TC mode)
Temp control range:200-600F/100-315 C
0.96″ OLED screen
Multiple protections
Intelligent atomizer recognition
Puff monitoring system
12 seconds cut-off
Short circuit protection
Over-heating protection
Low-battery warning

Features of TFV8 baby tank:
Material:stainless steel + pyrex glass
Size:53*22mm(EU version:50*22mm)
Capacity:3.0ml(EU version:2.0ml)
Re-designed bottom pair air slots
Top refill system
RBA deck supported

The Q-box kit include Q-BOX mod and baby tfv8 tank, max output 50 watts, built-in 1600 mah battery. It support resistance as low as 0.06 ohm, TC and VW output modes switchable. The smok Q-BOX mod built-in 0.96 inch OLED screen. This clear and bright screen will show you the vaping data, muiltple functions to keep vape safe.

The tfv8 baby tank can hold 3ml e juice. EU version only can hold 2ml e juice, comes with v8 baby-m2 coil heads, re-designed bottom pair air slots, top refill sysem and support RBA deck.

This mini size and fashionable vape kit smok Q-BOX will let vapers can put it in pocket easily. The mini size and powerful cloud beast tank will produce deep taste flavor and massive clouds. So vapers can enjoy vaping everywhere. How convenient it is. I know you would like to have one.





Urvapin Limitless 200w LMC TC Box Mod New Colors $55.69 Vape Deals

Limitless LMC 200W Box Mod

Temperature Control Box Mod

For a limited time only, the Limitless LMC 200w TC Box Mod New Version is on sale right here for only $55.69 from Urvapin! No coupon code required! Free shipping is included with this purchase! The colors available are new version Red, Flag, Rainbow, Space Gray and Grain.

The Limitless LMC 200W TC Box Mod is powered by two 18650 batteries (not included). This device does feature a maximum wattage output of 200w, and features a custom chip! The Limitless LMC 200w TC Box Mod also features temperature control for Ni200, Ti, and SS wires.

The Limitless LMC 200w TC Box Mod has a ton of safety features built in, providing the user a peace of mind during use. The Limitless LMC 200w TC Box Mod includes three memory modes as well as three presets: Soft, Standard, and Powerful. Lastly, the Limitless LMC 200w TC Box Mod features interchangeable plates with magnets, so you can easily customize this device!

All in all, this is a great deal for the Limitless LMC 200w TC Box Mod! If you are a fan of Limitless and looking to pick up a new temperature control box mod for cheap, then this is a deal you cannot miss! Make sure to check out this deal at Urvapin for only $55.69! This sale does end 6/23/17!

Order here:


Product Features:

  • Required 2 18650 batteries (not included)
  • Maximum wattage output: 200w
  • Minimum Firing Resistance: 0.08 ohm
  • Many Safety Features
  • Temperature Control: Ni200, Ti, SS
  • Interchangeable Plates with Magnets
  • 3 Preset Modes (Soft, Standard, Powerful)
  • New Version
  • Custom Chipset

Order here:


Limitless Pulse Pod System

The Limitless Pulse System, by Limitless Mod Co and Ply Rock, is a new, draw-activated, closed system pod mod with a difference – its pods are refillable. Like its older cousin the MyJet by MyVapors, this is a pod-based system which offers the user total control in what e-liquid they vape. The Pulse starter kit ships with the mod itself and two unfilled pods, retailing for $29.95, and a pack of three refillable pods sells for $11.49. The Pulse’s battery comes out at roughly 380 mAh, with a fixed 8 W output. The pods are 1 mL in capacity (although specs elsewhere state 1.5 – 2 mL). The inbuilt coils put out between 1.7 – 1.8 ohms and use silica as wicking material. The Pulse has a striking, futuristic look – LED accents running along the device light up on inhalation. The triangular button up front turns the device on and off, and toggles between the 7 color choices. Don’t judge a book only by its cover, however. Let’s take a closer look and vape on the Pulse.

For a pod mod, the limitless Pulse comes in lavish packaging. First impressions are great and the device looks futuristic with its dynamic accenting. The pods seem robust and the plastic mouthpiece pops off easily with a bit of prying. The Pulse is draw-activated, but can be turned on and off with five clicks of the button that also controls the LED accents.

One of the first things I notice is the beveled edge of the base of the device. This is one pod mod that is not intended to stand upright, and the sharp angle of this edge serves no purpose except to light up and look cool.

The pods click into the Pulse device easily enough, although the angular profile of the top of the Pulse makes it less plug-and-play and more push-and-jiggle than I’d like. I’ve seen conflicting specs for the Pulse from different sources so filled up one pod with a syringe of e-liquid. To my surprise, the pod only has a capacity of 1 mL. This is the smallest capacity of any pod mod system I’ve seen, apart from the Juul.

The coil and wick are located at the base of the pod. The coils use silica as the wicking material. By prying the positive and negative pinsout of the pod housing, I was able to get an ohm reading on a metering tab. It came out around 1.7 – 1.8 ohm. According to Limitless Mod Co’s blog the pods can be refilled 8 to 12 times before they need to be replaced.

Refilling the pods is simple. Remove the black mouthpiece with a little pressure and you will see a red rubber plug. This covers two holes on either side of the airflow chimney. A red arrow on the pod body indicates that only one hole should be used for refilling.

You will need a unicorn bottle or syringe to refill. I measured a capacity of 1 mL based on the syringe I used. Even for a pod mod, that’s small. But with an output of 8 W, you aren’t going to be burning through the e-liquid anyway.

The base containing the coil and wick can be easily pried away from the pod housing using a pair of elbow tweezers. I counted 9 wraps on the coil with an inner diameter of 1.5 mm. If you need to dry burn the coil, one option is to unfold and remove the gold connection pins from the pod housing. Connect the pins to the positive and negative posts of an RDA and screw this onto a metering tab.