Lost Vape Mirage DNA75C Mod Review

Lost Vape has been delivering some of the very best mods integrating the Evolv DNA chip for some time, and the Mirage looks like another exceptionally designed box.

The Lost Vape Mirage DNA75C Mod is a box mod designed to be compatible with a single high drain 18650, 20700 and 21700 (converter included) battery and can fire up to 100W Max using the latter two. Its manufactured with rounded ends with a colourful resin finish at the rear and also rumors of a wood body material replacing the resin soon.

The Mirage features the Evolv DNA75 Color chip inside which incorporates a power regulated digital switch-mode and Evolv’s patented Wattage Control, Temperature Protection, Preheat, a full-color TFT screen, Reverse Polarity Protection, an onboard programmable multicolor LED, waterproof buttons and a real-time clock.

Specs & Features

Specs:

Evolv DNA75C Board with upgradable firmware
Theme Designer Software/Customizable User Interface
Onboard Programmable Multicolor LED
Stainless Steel 510 Atomizer Connector
Anodized Aluminum Frame and Top
Boost/Preheat 100 Watts Power
Integrated 1Amp On-board Balanced Charger
Flip-Open Battery Sled
Single 18650/20700/21700 Convertible

Size: 43.5mm x 28mm x 93mm
Temperature Limit: 200F – 600F
Output Power: 1 – 75 Watts
Power: 100W
Resin Color: Green Agate/Red Blaze
Frame Color: Dark Grey/Black

Urvapin’s Easter Sale is coming,10% off with coupon code: Easter,just cheack the link: https://www.urvapin.com/easter

Strong Recommend:
Smoant S8 Pod Starter Kit
Wismec Luxotic NC Dual 20700 Kit
Vaporesso ORCA Solo Kit

VOOPOO TOO 180W TC BOX MOD Pre Sell at Urvapin

After the success of Drag series and Alpha One, Voopoo released a new beautiful mod with stunning appearance called the Voopoo Too.

Unlike traditional mods on the market the Voopoo TOO is compatible with either single and dual battery. It supports the respective maximum out power of 80W and 180W, depending on your preference. Under the hood the TOO boasts the advanced GENE chip, delivering the fastest fire speed of 0.01 seconds.

Its unique push-pull design of battery door and custom colorful cover, definitely will make this Mod stand out from the crowd.

Moreover, the soft mode ensure you a safe vaping experience at higher wattages. It delivers a smoother flavour, whilst prolongs the performance of your coils.

If you want to find a shining and stable mod with plenty of punch this Voopoo TOO is worth of your try.

Available in a choice of stunning finishes to match your every mood.

VOOPOO TOO 180W TC BOX MOD
VOOPOO TOO 180W TC Box Mod Features:

Dual High-Amp 18650 Batteries – Not Included
Optional Single 18650 Platform
Maximum Wattage Output – Dual 18650: 180W
Maximum Wattage Output – Single 18650: 80W
Output Voltage Range: 5-8.5V
Min Atomizer Resistance: 0.05ohm
Temperature Range: 200-600F
Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
Comprehensive TCR Adjustments
SOFT Mode
Highly Advanced US GENE Fun Chip
CNC Precision Milled
High-Quality Zinc Alloy Construction
Leather Embedded Exterior Battery Cover – Fully Interchangeable
Sharp Lines and Sleek Design
Intuitive 0.91 Inch OLED Display
Oversized Circular Firing Mechanism
Dual Adjustment Buttons
Short Circuit Protection
Over-Temperature Protection
Reverse Polarity Protection
Overtime Protection
Output Over-Current Protection
Overcharge Protection
Over Discharge Protection
Low Battery Warning
MicroUSB Port – Firmware Upgrades
510 Connection
Available in Dazzle, Pitch Dark, Raisin, Turquoise

Related Recommend:
buy electronic cigarette online
smok priv v8 kit
iJoy Elite PS2170 kit
SMOK Mag kit

Boxer of electronic cigarette Geekvape AEGIS

Today I would like to tell you about the boxmode, which has no analogues at the moment. The main advantage of brutal Geekvape Aegis Mod from Geekvape is protection from water, dust, dirt, falls according to IP67 standards and MIL STD 810G-516.6.

Under the cut we will examine it from all sides, we will dip it in water and throw it. All interested are welcome.

Information for those who do not want to see reviews of electronic cigarettes in their own tape: in the upper right corner of the page click on “Settings”. Next, go to the “Display of materials” page. In the window that opens, mark “Electronic cigarettes” and click on the “save settings” button. After the done actions, you will no longer see unpleasant material.

Packaging

Supplied in a box of cardboard.

On the reverse side description and scratch code for checking originality.

The kit consists of: a boxman, instructions, o-rings, a cap for the usb port, screws and an adapter under 18650. There is also a version with a 26650 battery.

Appearance
Height – 88 mm
Width – 46.8 mm
Thickness – 37.8 mm
Weight – 202 grams

Available in four colors. Only the metal frame and the leather insert differ.

It is made of zinc alloy and aluminum. The first thing you pay attention to, after opening the box, is the smell of cheap Chinese shoes. On the first day he even interrupted the taste of the liquid. The build quality leaves much to be desired. There are superfluous cracks and inconsistencies of some decorative elements. The rubber insert on most of the device is just some kind of horror. She is constantly in mud and nap. Clean only happens in the first minutes after washing under running water. Looking at the promo photos on the Internet, I expected to get a three-hundred-foot brick, but in reality the mod was very convenient to use. In the hand lies like a poured. But that’s how it is too big for a single battery. However, for the sake of security, something must be sacrificed.

On the front side are:
The button “Fire”. The click is distinct, pleasant and not loud. The button itself sits tight and does not stagger.
0.96 “display.It is especially worth noting that in the off state it completely merges with the entire front glossy plastic panel.This is not often found.
The “±” buttons. But their click is heard from another room. Are located somehow very close to each other. Sometimes you can accidentally press both. Also not rattling.

On the back there is supposedly a leather insert with a stitching a la LG G4.

The name of the manufacturer is engraved on the side. Two torx screws hold the metal frame.

The opposite side is completely analogous to the previous one, only here is the engraving of the name of the device.

On top is a solid steel connector with a brass or gold-plated spring-loaded pin. It did not succeed in deforming it with various atoms. Connector platform can accommodate an atomizer, probably of any diameter.

Nearby is a microUSB-port for firmware device. It is covered with a silicone plug and a metal cover, which is fixed with two torx screws. Screwdriver in the set did not come up. Built-in charging is not. Although, with such a hemorrhoids access to the microUSB-port it is there to see it and would not want to.

At the bottom of the box, the battery compartment cover.

To extract it, you need to raise the lamb and, in fact, unscrew it.

On the inside of the lid there is an o-ring.

Threads of high quality. Problems with twisting / unwinding, as it happens in the modes with a similar solution, no.

Inside the compartment, mark the correct location of the battery.

Eats Aegis either from one battery 26650, or from 18650 with the help of a complete adapter.

Geekvape Aegis 100W TC Box Mod
Card Features
Power Rating: 100W
Max. Voltage: 9V ± 0.1V
Operating temperature range: -40 ° C to 80 ° C
Battery discharge up to 3.3V ± 0.1V
Thermal control on nickel, steel, titanium and TCR
Supported resistance range: Power and Bypass – 0.05 – 3 Ω / TC-NI – 0.05 – 0.8 Ω / TC-SS – 0.05 – 1.65 Ω / TC-TI – 0.05 – 1.1 Ω
Temperature range in TC mode: 100 ° C – 300 ° C / 200 ° F – 600 ° F

Earlier I did not encounter boxmodes from Geekvape and the first acquaintance left a positive impression. I did not see any flaws in the quality of the work. According to the manufacturer, the delay is minuscule 0.015 seconds. Whether it triggers autosuggestion, whether the start of the roast is really instant. Unfortunately, the board does not have a wide range of options. Navigation in the menu is convenient. By pressing the “Fire” three times, the modes change, and once – change the parameters. From the third-party settings, only the brightness adjustment of the display is available and the “±” buttons are locked. And about the modes, of which 7, now briefly tell.

Power – varivatt. The screen displays power, battery indicator, resistance, current strength, voltage and number of puffs / time of the last tightening. In the varivatta device without problems copes with the winding of 0.09 Ohm. The resistance of the coil changes only during tightening. On DNA, for example, that in idle time, that at the moment of tightening, the actual resistance of the build is always displayed. You can lock it and reset it, after which the mod will fix the current resistance. Cut-off after 10 seconds.
TC-NI / TC-SS / TC-TI – Thermal control on nickel, steel and titanium. The same settings are available as in the previous mode. You can not adjust the TCR.
TCR – and here already the temperature coefficient is adjusted.
VPC – heating curve. Available 5 divisions in 1 second increments. During tightening, the point on the graph moves in accordance with the previously set power. The transition from one division to another is smooth.
Bypass – Mehmode mode. You can also lock and drop resistance.

Crash test

Geekvape Aegis Box mod, as you already read in the cap, is protected by the standards of MIL STD 810G-516.6 and IP67, which means resistance to short-term immersion in water, protection against ingress of dust into the body and painless drops from a small height without any consequences. The warranty does not cover internal failures due to the user’s fault, so do not disassemble it without special need. The network already has a huge variety of all kinds of bullying over this device. That in liquid nitrogen is dipped, then the machine moves. Honestly, it’s not that much and I want to sway in the trash of the modes, so I will limit myself to water procedures and falls at home.
Let’s start with the test with water. He put it for 20 minutes in the basin. This will be enough to check how it behaves in the rain, when falling in a puddle, a fountain or other not deep accumulations of water. The battery is inside, the device is turned on.

At the end of the bath we observe an unpleasant picture – the water got into the interior, but this did not affect the working capacity. In the battery compartment nothing stranger penetrated.

Analysis of Geekvape Aegis Mod occupation is not simple. The glossy panel is held on a double-sided tape. Fears were in vain – a drop of water accumulated on a protective plastic plate.

Go ahead. This plate is in turn fastened to a silicone sealant. It tore even harder. There are no traces of moisture on the board. It can be concluded that the presence of water under the front panel is not a verdict. The more often in attacks of paranoia will disassemble the mode after immersion in water, the higher the probability of depressurization of the shell.

After that, he dropped a dozen times, imitating the various situations in which this is possible. There are no deformations on the body of the tracks. Yes, laminate is not asphalt, but on the same crash tests from the network of deplorable consequences, too, was not.

Comparison of dimensions and fitting

Snowwolf 200C, Geekvape Aegis, LostVape Therion 166.

IJOY Combro RDTA II, VGOD RDTA RII, SMOK TFV8 Big Baby.

Geekvape Aegis 100W TC Box Mod
Conclusion
Pros:
Protection against falls, dust and water
Quality board
Brutal appearance in the compartment with comfortable ergonomics
Use with batteries 26650 and 18650
The solid connector. It is able to place almost any atoms on itself.

Minuses:
Not the most ideal assembly
Rubber inserts are instantly spoiled
Lack of charging through box-box
Water can still penetrate into the body

In the previous review from greed811 boxmode, after getting moisture, did not turn on. I did not have such a problem. Because we are dealing with the miracle of the Chinese industry and everyone is familiar with their floating manufacturing quality, do not put grandiose hopes that this device will survive 100%. A certain share of the probability of a lamentable outcome is still present. However, despite this, there are simply no alternatives to Aegis. With it, you can go fishing, hunting, dusty plant / garage, camping, and any other place without fear of dropping it into the water, dirt, on the asphalt or trite not to worry about the leaked liquid from the atom. We can only hope that the trend for the protected devices will be picked up by all manufacturers and this will be an integral part of each new product. Rusty is where. For example, to rid the microUSB port of a ton of stubs in the same way as in smartphones.
Thanks to all.

The Geekvape Aegis Mod is provided for writing a review by the store. The review was published in accordance with paragraph 18 of the Site Rules.

Best Seller:
buy electronic cigarette online
ijoy Genie PD270
Nicomore M1
smoant charon ts 218w

A palm size kit – Vaporesso Swag 80w Kit

Vaporesso Swag 80w Kit consists of the modernly designed swag mod and the NRG SE Tank. Vaporesso Swag mod adopted progressive IML generation. It is powered by means of unmarried high-rate 18650 battery and the most output may be reached to 80W to carry you excellent vaping enjoy. With upgradable Omni 2.0 chip, the Vaporesso SWAG capabilities 2A fast charging, and support VT, TC, VW, Smart modes. The NRG SE Tank by Vaporesso inherited the Twist Open design, smooth adjustable bottom air flow from the NRG family. As a Special Edition, it is now 22mm wide, perfectly matching the new Swag Mod. It supports 3.5 ml e-juice capability, with twist open design and CCELL coils to provide exquisite flavors. NRG SE Tank features adjustable backside air drift.

Vaporesso Swag 80w Kit
vaporesso swag 80w mod features:
Mod Size: 75mm x 48mm x 25mm
Weight: 99 g
Power Range: 5-80 W
Display: 0.91″ OLED
Suitable Atomizer: 0.05 – 5 ohm
Voltage Range: 0-8.5V
Temperature Range: 100℃-315℃/200F-600F
Output Modes: VW(H/N/S), CCW, CCT, VT(NI,TI,SS), TCR(M1,M2), RTC, BYPASS
Battery Cell: 1x Lithium 18650 (not included)
Casting: Aluminum Alloy
Thread: 510 thread
Four different colors: Sliver, Orange, Blue, Black

NRG SE Tank features:
Material: Stainless Steel
Size: 22 x 48.5mm
Weight: 46g
Capacity: 3.5ml
Coil: 0.4ohm GT2 coil

Vaporesso Swag 80w with NRG SE Kit comes with
1 * SWAG Mod
1 * GT2 Core (Pre-installed)
1 * User Manual
1 * NRG SE Tank
1 * Vaporesso USB Cable
1 * GT CCELL (Extra)
1 * Replacement Glass Tube

To buy such a palm Vaporesso Swag 80w Kit, you can go on Urvapin. You will get nice price! Best service! Fast reply! What are you waiting for? Hurry up!

Strong Recommend:
cheap vape deals
smoant charon ts 218 mod
asvape michael mod
snowwolf vfeng 230w

Puff Avatar RS 75W DNA TC Mod

Puff Avatar RS 75W DNA TC Mod, a single-18650 powered device equipped with Evolv’s world famous upgradeable DNA chipset. The Puff Avatar RS 75W DNA TC Mod can put out 75 watts of raw power to satisfy the overwhelming majority of vapers out there. Yes, the Evolv DNA chip is fantastic, yes the device is loaded with features and technology that can fly you to the moon but Puff being an Italian company, they did not stop there. On the contrary, it is apparent they pushed the envelope as hard as possible and went to absolute extremes to achieve visual appeal like no other. Without any exaggeration, we can easily and rightfully say the Puff AVATAR RS DNA 75W boasts one of the most attractive outer designs in the vaping world, bar none.

Puff AVATAR RS DNA 75W features:
Equipped with the official Evolv DNA 75 chipset
1W – 75W output
30A maximum continuous output
Firmware upgradable
Compatible with Escribe
Full temperature control capability
Supports Ni200 nickel, titanium and stainless steel
Extra settings configured with Escribe
Temperature range between 93°C – 315°C (200°F – 600°F)
Body equipped with grooved LED lights
White, yellow, green, blue, orange, purple and red
Controlled by a dedicated button to turn on/off and change color
LED lights fire up each time the fire button is pressed
LED lights do not use a lot of power
Works with a single 18650 battery
Threaded battery door at the bottom
2.3cm (0.91″) OLED screen
Displays all essential data in a neat and easily readable format
The display can be adjusted through EScribe
Gold-plated, spring loaded 510 connector

EScribe software
Can configure the device by applying changes to the chipset
Micro USB port
Max. 1A charging
Also used for firmware and software upgrades
Dimensions: 49mm * 28mm * 92mm
Comes with an authenticity check code

Top class in performance and style – often claimed, rarely true but it definitely applies here. The vape – 100%. The look – 100%. The social magnet factor – beyond measure! For more option of the Puff AVATAR RS DNA 75W, appreciate you to check more surprise on Urvapin, this new items with Innovation must earn a good market, do not hesitated, hurry to check! The preorder will end on August 8, 2017.

Best Seller:
electronic cigarette
ijoy captain pd270
smok stick v8
tesla terminator

SMOK GX350 TC Kit Review

Today, let’s take a look at the SMOK GX350 starter kit, with powerful and small size, works with 4x 18650 high-amp batteries of a maximum wattage output of 350 Watts. Along with TFV8 Cloud Beast Tank that make you enjoy fantastic clouds.

smok gx350
When I first receive the GX350, I was so impressed and surprise. It’s pretty small mod powered by 4 batteries and is strong powerful mod by SMOK. The GX350 box mod measures 58mm x 40.4mm x 84.5mm, Tridimensional polygon design features with curved streamline and aircraft carrier appearance that fits nicely in the palm of my hand. It is much smaller than the Wismec Reuleaux RX300 quad 18650 300 watt mod, while larger than SMOK Alien 220. At the top of the box, we can see the 510 spring-loaded connector and a screen of OLED.We can check for the vaping information by the bright OLED screen and adjust by pressing “+” “-“. On the side of the box, there is a Micro USB port by a rubber cap to prevent internal damage, which supports firmware upgrading and charging.

smok gx350
And the exit of battery, we can see that ridimensional polygon design has shortened the perimeter to 155mm, although it can carry 4 x 18650 batteries by the small space. We can open the battery chamber by grip the two sides of the battery cover and direct pull. The mod kit allows to use quad 18650 batteries and boasts up to 350W of power. Supports VW/TC mods, offers temperature control that allows you to range from 200-600 degrees.

TFV8 Cloud Beast Tank can hold up to 6ml of e-juice and top-refilled, adjustable dual bottom airflow and a drelin drip tip. Utilizes 4 unique patented Turbo Engines coil structure: V8-T8 (6.6T), V8-T6 (6.0T), V8-Q4 (5.0T), V8 RBA (4.0T-X), which will completely changing your vaping experience.

The SMOK GX350 Kit has an attractive and ergonomic design with contours that makes it perfect to hold in hand as well as aesthetically pleasing. Powered by quad batteries with strongest power reach 350watts, match with the cloud beast TFV8 sub ohm tank, which will bring vapers fantastic cloud and amazing vaping experience. I think it would be one of the popular powerful starter kit with strongest output for 2017, you can’t miss it!

Best Seller:
buy electronic cigarette online
tesla 120w box mod
Coil Master DIY Kit V3
Smok Vape Pen 22

iJoy 200W RDTA Box Kit Review

ijoy rdta box
RDTA is a term invented by iJOY to describe the capabilities of its rebuildable tank system, which essentially combines the features of a rebuildable atomizer and rebuildable tank system. The iJoy RDTA 200W starter kit showcases iJoy’s creative evolution- putting forth only the best cutting-edge technology and superb engineering for what may be the most impressive starter kit accessible to the vape community.

The RDTA Box Mod is a mammoth dual 18650 vaporizer that stands tall at 135mm and measures 55mm x 28mm wide. This 200W device houses a massive 12.8mL e-juice capacity that’s accessible via threaded 15mm top-fill mechanism located on top of the device, providing a substantial e-juice reservoir that’s sealed off and completely leak-free. To make this device even more appealing, the iJoy RDTA Box is equipped with an atomizer that is compatible with iJoy’s long line of pre-made IMC coils currently available for the Combo RDTA.
ijoy rdta box
The atomizer features a removable wide-bore delrin drip tip and houses a removable two-post velocity style deck that has four large wicking ports cut directly into the bottom of the deck. These wicking ports allow the user to feed the cotton wick through the bottom of the atomizer and into the massive e-juice reservoir for fast, non-stop wicking. Nobody likes getting dry hits, which is why iJoy put a LED inside the e-juice reservoir that illuminates when the fire button is pressed, giving the user a brightly lit estimate on how much e-juice remains in the tank. The powerful RDTA Box mod is an attractive 200W Temperature Control device that is fully functional with Nickel, Titanium and Stainless Steel Coils. This mod features a large firing button that’s clicky and responsive when being pushed, a large OLED screen, two regulatory buttons, and a MicroUSB port (firmware upgrades only). Similar to iJoy’s Limitless LUX device, the chassis on the RDTA Box is magnetic and slides off to reveal the dual 18650 battery bay.

With the device powered on, the bright OLED screen displays the current wattage, voltage, resistance, battery power and vape mode strength. In temperature control modes, the iJoy RDTA box provides several pre-made vape modes that alter how quickly the device heats up and reaches the desired temperature. In User Mode, the user can create their own custom ramp-up settings that will increase or decrease wattage on a 2-second basis.

iJoy RDTA Box Starter Kit is a perfect representation of what happens when hardworking engineers think outside of the box and take the path less chosen. It will go down in history as a unique and influential device.

Best Seller:
cheap vape deals
smok t priv
wismec rx gen3
aspire breeze

VapeMan Steam Engine 75W Box Mod

vapeman steam engine box mod
VapeMan Steam Engine 75W Box Mod is a compact device and boasts a unique design and a powerful DNA75 chipset that is sure to cement its popularity with the masses. It is powered by dual 18650 cells. The slide battery cowl can offer handy user revel in. And the custom OLED display screen is vibrant and person friendly. The electricity output going for walks as much as 75W. Steam Engine Mod has Update firmware USB port and particular TC modes. It can be used in Temperature Control mode with Ni200 Nickel and Titanium Coils. What appealing maximum is the DNA75 chipset with its special capabilities. This unique device promises reliable performance – thanks to the quality Evolv DNA75 chipset installed and this paired with the iconic “steam-punk” inspired design, makes it the perfect vape collectable. It capabilities Wattage Control, Patent Pending Temperature Protection, Preheat, Digital User Controls, OLED Screen, Onboard Buttons and Synchronous Rectification for optimum battery lifestyles and minimum heat generation. How super the mod is! Hurry up and revel in cloudage vaping experience!

vapeman steam engine box mod

Features & Spec:
Size: 63*28*85mm
DNA75 ChipSet
OLED Display
Pre-heat Mode
Escribe Screen customization
Precise temperature control modes
Extended battery life W/Dual 18650 cells
Compatible with Ni200, Ti01, Kanthal, And stainless coils
Screen Size: 0.91″ OLED
Battery Capacity: Dual 18650 Dells Setup(Not included)
Output Power: 1W-75W
Output Voltage: 0.2V-6.2V
Output Current: 30W-40A
Temperature Limit: 200℉-600℉
Input Voltage: 3.0V-4.2V
Input Current: 0.5A-28.0A

Package:
1 * Vapeman Steam Engine DNA 75W box mod
1 * Charging Cable
1 * User Manual

For many best features of VapeMan Steam Engine 75W Box Mod please visit on Urvapin, also if you have any question or suggestion welcome to contact us. We are waiting for providing you best service.

Best Seller:
cheap vape deals
smok t priv
wismec rx gen3
aspire breeze

Introduction of Puff AVATAR RS DNA 75W mod

Unpacking the package we see the Puff Avatar RS 75W DNA Mod (Battery not included), one Charging Cable, one Gift Box and one User Manual.

The paint of Puff AVATAR RS DNA 75W mod is smooth. There is no paint defects and paint is not easily knocked off.

puff avatar rs 75w dna mod

LED lamp chamfer is delicate, and especially the hollowed-out line groove are all polished meticulous without burr. LED lamp design is undoubtedly RS75’s biggest features. In today’s electronic cigarette equipment it is already far beyond the nature of the chips, while with essential strength, it also has a certain level of appearance and new pattern to achieve “personality”. That is what more and more vapers are pursuing.

Puff AVATAR RS DNA 75W doesn’t have any advantage in size. Because of the LED lighting layout and space constraints, RS75 overall volume will between single battery mod and double battery mod. According to portability, RS75 appears a little heavy. But just because it is not mini, with shining LED lights, it feels cool holding on hands when in ignition.
puff avatar rs 75w dna mod
The mod is supported by single 18650 battery. The battery life seems to be the biggest problem. Putting aside the performance, actually taking a backup battery is not a very troublesome thing. Vapers may care about whether the LED light will make the battery life shorter. In fact, the LED light doesn’t consume much power.

Puff AVATAR RS DNA 75W mod with DNA75 chipset undoubtedly ensures the inner function and also display the beauty of appearance design. For more details about it please go on Urvapin. The Puff AVATAR RS DNA 75W mod is on preorder. The dates ends on August 8, 2017. Hurry up! You can’t miss it!

Best Seller:
cheap vape deals
osub 80w baby
asvape michael mod
snowwolf vfeng

Preorder CoilART DPRO RDA on Urvapin

CoilART DPRO RDA seems to be the best-equipped RDA. The DPRO RDA was masterfully designed to be used as a dripper and squonk RDA. It also has one of the most unique build decks and airflow systems. COILART has made themselves outstanding once again!

coilart dpro rda tank

The 24mm diameter beast stands at just 36mm tall, so it’s almost as round as it is tall, and looks ravishing. The CoilART DPRO RDA comes in 3 colors so far; black, stainless, and ultem. That ultem was love at first sight for sure though, right? The 24k gold plated build deck is a dual coil postless setup. You can just build one big single coil in here too but the flavor and clouds won’t be as intense. Speaking of flavor, the airflow system really is the business in this machine. The dual slot adjustable airflow brings air in from the side to hit the middle and bottom of your coils. Mix that with the small chamber and you have the flavor experience of a lifetime. The cloud production is really good too because of the dual coil functionality. This thing is mad squonkable too. CoilART DPRO RDA is throwing a 510 pin and a squonk pin in the package for all you push bottle lovers and the drip heads. Best of both worlds situation? You also get an ultem 810 drip tip!

coilart dpro rda tank

CoilArt DPRO RDA Tank Comes with one DPRO RDA, two Fused Clapton Coil(CoilART Handmade Coil), two Cotton and one Accessories Bag. It is now on pre-sale at Urvapin. The date starts on July 29 and ends on August 10. Please don’t hesitate to contact us.

Best Seller:
buy electronic cigarette online
snowwolf vfeng
ijoy captain pd270
aspire zelos
azeroth rta