Lost Vape Mirage DNA75C Mod Review

Lost Vape has been delivering some of the very best mods integrating the Evolv DNA chip for some time, and the Mirage looks like another exceptionally designed box.

The Lost Vape Mirage DNA75C Mod is a box mod designed to be compatible with a single high drain 18650, 20700 and 21700 (converter included) battery and can fire up to 100W Max using the latter two. Its manufactured with rounded ends with a colourful resin finish at the rear and also rumors of a wood body material replacing the resin soon.

The Mirage features the Evolv DNA75 Color chip inside which incorporates a power regulated digital switch-mode and Evolv’s patented Wattage Control, Temperature Protection, Preheat, a full-color TFT screen, Reverse Polarity Protection, an onboard programmable multicolor LED, waterproof buttons and a real-time clock.

Specs & Features

Specs:

Evolv DNA75C Board with upgradable firmware
Theme Designer Software/Customizable User Interface
Onboard Programmable Multicolor LED
Stainless Steel 510 Atomizer Connector
Anodized Aluminum Frame and Top
Boost/Preheat 100 Watts Power
Integrated 1Amp On-board Balanced Charger
Flip-Open Battery Sled
Single 18650/20700/21700 Convertible

Size: 43.5mm x 28mm x 93mm
Temperature Limit: 200F – 600F
Output Power: 1 – 75 Watts
Power: 100W
Resin Color: Green Agate/Red Blaze
Frame Color: Dark Grey/Black

Urvapin’s Easter Sale is coming,10% off with coupon code: Easter,just cheack the link: https://www.urvapin.com/easter

Strong Recommend:
Smoant S8 Pod Starter Kit
Wismec Luxotic NC Dual 20700 Kit
Vaporesso ORCA Solo Kit

Wotofo Nudge Squonk Box Mod Review

Wotofo has entered the fray of budget squonkers with the Wotofo nudge squonk box. It’s not an entirely new design, in fact, it is more of an update on their sister company’s squonk box, the Stentorian RAM. It even uses some of the same parts.

However, with a change of materials, and a fuse for safety it does make it an even more appealing option for the budget squonker.

At first glance, you might be mistaken in thinking the Wotofo Nudge squonk box is made from premium materials with its carbon fiber like panels and gold accents.

However, on closer inspection, you can tell it’s just a plastic box with some clever design choices to make it look less so. But that’s not a bad thing after all this is Wotofo’s answer to the budget squonker, and considering you can pick one up for around $25, I don’t think anybody could grumble with the build quality and materials used.

Wotofo has also taken a different approach to safety and incorporated the use of a 30 amp fuse (spares also included). Some hardcore mechanical squonkers may turn their nose up at this, as the Nudge is not a truly mechanical squonk box, but just unregulated. I, on the other hand, think it’s a welcome move as more new vapers are looking to get into squonking, and anything that manufacturers can do to protect them from overstressing batteries and potentially blowing their faces is off is a good thing.

Wotofo Nudge Squonk Box Mod Features:

Dimensions: 50 x 24 x 75mm
Battery: 1x 18650 cell (not included)
Thread: Spring-loaded & gold-plated 510 thread
Bottle: 7ml food grade PET Squonk bottle
Metal parts: 24K Gold material
Color: Black
Wotofo Nudge Squonk Box Mod – What’s in the box:

1x Nundge Box Mod
1x 7ml PET Squonk bottle
1x User Manual

New Arrival:
Vaporesso Nexus Starter Kit
Smok Devilkin 225W TC Kit
OBS Crius RDA

ijoy capo 216 srda

The newly released iJoy Capo 216 SRDA Kit, the industry’s first squonk mod that powered by dual 20700 batteries is changing the e-cigarette market. The iJoy Capo 216 SRDA Kit is fueled by ease of use and performance.

The durable materials promote exceptional quality and class of the mod. Its appearance is sleek and colorful. The front side of the iJoy Capo 216 Squonk Box Mod has a dazzling OLED screen which displays rich data feedback. And the screen is in perfect placement. The front side also offers features like adjustment buttons and micro-USB port. The accented ventilation holes are on each side of the device. The backside is designed well to feel comfortable in the palm. On the upper portion of the mod there is a large fire button.

With a chipset designed by IWEPAL, the output power reaches up to 216 watts. A slew of additional features, such as temperature control with support of Ni200 Nickel, Titanium, Stainless Steel and TCR adjustments are available. There are also three power modes: Normal, Soft, and Hard. The iJoy Capo 216 Squonk Mod is capable of housing either dual 20700 batteries or dual 18650 batteries with the included 18650 battery adapter. This mod is the first and only dual 20700 squonk mod with a compact design.

What makes this mod differs from the rest is it being a capable squonk mod. The squonk bottle adopts an environmentally friendly silicone material. It allows easily squeeze and prevents accidental squeeze leaks when disassembling. With a hard part to hold and a soft part to squonk it is solid and durable.

The included Combo SRDA is a semi-rebuildable dripping atomizer. It very easy to change between pre-made coils and rebuildable decks. Four rebuildable decks and two types of coils are available.

Package includes one iJoy Capo 216 Squonk Box Mod, one 18650 Adapter, one Combo SRDA(SRDA-CE Coil 0.13Ohm Pre-installed), one Tool Pack(O-rings, special wrench, Japanese organic cotton), one Squonk Bottle, one USB Cable, one Manual and Warranty Card. For more details about iJoy Capo 216 srda please go on Urvapin. You will love it.

E-cigarette Brand Recommend:
innokin Vape
Auro Vape
Sense Vape
HCigar Vape

VOOPOO TOO 180W TC BOX MOD Pre Sell at Urvapin

After the success of Drag series and Alpha One, Voopoo released a new beautiful mod with stunning appearance called the Voopoo Too.

Unlike traditional mods on the market the Voopoo TOO is compatible with either single and dual battery. It supports the respective maximum out power of 80W and 180W, depending on your preference. Under the hood the TOO boasts the advanced GENE chip, delivering the fastest fire speed of 0.01 seconds.

Its unique push-pull design of battery door and custom colorful cover, definitely will make this Mod stand out from the crowd.

Moreover, the soft mode ensure you a safe vaping experience at higher wattages. It delivers a smoother flavour, whilst prolongs the performance of your coils.

If you want to find a shining and stable mod with plenty of punch this Voopoo TOO is worth of your try.

Available in a choice of stunning finishes to match your every mood.

VOOPOO TOO 180W TC BOX MOD
VOOPOO TOO 180W TC Box Mod Features:

Dual High-Amp 18650 Batteries – Not Included
Optional Single 18650 Platform
Maximum Wattage Output – Dual 18650: 180W
Maximum Wattage Output – Single 18650: 80W
Output Voltage Range: 5-8.5V
Min Atomizer Resistance: 0.05ohm
Temperature Range: 200-600F
Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
Comprehensive TCR Adjustments
SOFT Mode
Highly Advanced US GENE Fun Chip
CNC Precision Milled
High-Quality Zinc Alloy Construction
Leather Embedded Exterior Battery Cover – Fully Interchangeable
Sharp Lines and Sleek Design
Intuitive 0.91 Inch OLED Display
Oversized Circular Firing Mechanism
Dual Adjustment Buttons
Short Circuit Protection
Over-Temperature Protection
Reverse Polarity Protection
Overtime Protection
Output Over-Current Protection
Overcharge Protection
Over Discharge Protection
Low Battery Warning
MicroUSB Port – Firmware Upgrades
510 Connection
Available in Dazzle, Pitch Dark, Raisin, Turquoise

Related Recommend:
buy electronic cigarette online
smok priv v8 kit
iJoy Elite PS2170 kit
SMOK Mag kit

Boxer of electronic cigarette Geekvape AEGIS

Today I would like to tell you about the boxmode, which has no analogues at the moment. The main advantage of brutal Geekvape Aegis Mod from Geekvape is protection from water, dust, dirt, falls according to IP67 standards and MIL STD 810G-516.6.

Under the cut we will examine it from all sides, we will dip it in water and throw it. All interested are welcome.

Information for those who do not want to see reviews of electronic cigarettes in their own tape: in the upper right corner of the page click on “Settings”. Next, go to the “Display of materials” page. In the window that opens, mark “Electronic cigarettes” and click on the “save settings” button. After the done actions, you will no longer see unpleasant material.

Packaging

Supplied in a box of cardboard.

On the reverse side description and scratch code for checking originality.

The kit consists of: a boxman, instructions, o-rings, a cap for the usb port, screws and an adapter under 18650. There is also a version with a 26650 battery.

Appearance
Height – 88 mm
Width – 46.8 mm
Thickness – 37.8 mm
Weight – 202 grams

Available in four colors. Only the metal frame and the leather insert differ.

It is made of zinc alloy and aluminum. The first thing you pay attention to, after opening the box, is the smell of cheap Chinese shoes. On the first day he even interrupted the taste of the liquid. The build quality leaves much to be desired. There are superfluous cracks and inconsistencies of some decorative elements. The rubber insert on most of the device is just some kind of horror. She is constantly in mud and nap. Clean only happens in the first minutes after washing under running water. Looking at the promo photos on the Internet, I expected to get a three-hundred-foot brick, but in reality the mod was very convenient to use. In the hand lies like a poured. But that’s how it is too big for a single battery. However, for the sake of security, something must be sacrificed.

On the front side are:
The button “Fire”. The click is distinct, pleasant and not loud. The button itself sits tight and does not stagger.
0.96 “display.It is especially worth noting that in the off state it completely merges with the entire front glossy plastic panel.This is not often found.
The “±” buttons. But their click is heard from another room. Are located somehow very close to each other. Sometimes you can accidentally press both. Also not rattling.

On the back there is supposedly a leather insert with a stitching a la LG G4.

The name of the manufacturer is engraved on the side. Two torx screws hold the metal frame.

The opposite side is completely analogous to the previous one, only here is the engraving of the name of the device.

On top is a solid steel connector with a brass or gold-plated spring-loaded pin. It did not succeed in deforming it with various atoms. Connector platform can accommodate an atomizer, probably of any diameter.

Nearby is a microUSB-port for firmware device. It is covered with a silicone plug and a metal cover, which is fixed with two torx screws. Screwdriver in the set did not come up. Built-in charging is not. Although, with such a hemorrhoids access to the microUSB-port it is there to see it and would not want to.

At the bottom of the box, the battery compartment cover.

To extract it, you need to raise the lamb and, in fact, unscrew it.

On the inside of the lid there is an o-ring.

Threads of high quality. Problems with twisting / unwinding, as it happens in the modes with a similar solution, no.

Inside the compartment, mark the correct location of the battery.

Eats Aegis either from one battery 26650, or from 18650 with the help of a complete adapter.

Geekvape Aegis 100W TC Box Mod
Card Features
Power Rating: 100W
Max. Voltage: 9V ± 0.1V
Operating temperature range: -40 ° C to 80 ° C
Battery discharge up to 3.3V ± 0.1V
Thermal control on nickel, steel, titanium and TCR
Supported resistance range: Power and Bypass – 0.05 – 3 Ω / TC-NI – 0.05 – 0.8 Ω / TC-SS – 0.05 – 1.65 Ω / TC-TI – 0.05 – 1.1 Ω
Temperature range in TC mode: 100 ° C – 300 ° C / 200 ° F – 600 ° F

Earlier I did not encounter boxmodes from Geekvape and the first acquaintance left a positive impression. I did not see any flaws in the quality of the work. According to the manufacturer, the delay is minuscule 0.015 seconds. Whether it triggers autosuggestion, whether the start of the roast is really instant. Unfortunately, the board does not have a wide range of options. Navigation in the menu is convenient. By pressing the “Fire” three times, the modes change, and once – change the parameters. From the third-party settings, only the brightness adjustment of the display is available and the “±” buttons are locked. And about the modes, of which 7, now briefly tell.

Power – varivatt. The screen displays power, battery indicator, resistance, current strength, voltage and number of puffs / time of the last tightening. In the varivatta device without problems copes with the winding of 0.09 Ohm. The resistance of the coil changes only during tightening. On DNA, for example, that in idle time, that at the moment of tightening, the actual resistance of the build is always displayed. You can lock it and reset it, after which the mod will fix the current resistance. Cut-off after 10 seconds.
TC-NI / TC-SS / TC-TI – Thermal control on nickel, steel and titanium. The same settings are available as in the previous mode. You can not adjust the TCR.
TCR – and here already the temperature coefficient is adjusted.
VPC – heating curve. Available 5 divisions in 1 second increments. During tightening, the point on the graph moves in accordance with the previously set power. The transition from one division to another is smooth.
Bypass – Mehmode mode. You can also lock and drop resistance.

Crash test

Geekvape Aegis Box mod, as you already read in the cap, is protected by the standards of MIL STD 810G-516.6 and IP67, which means resistance to short-term immersion in water, protection against ingress of dust into the body and painless drops from a small height without any consequences. The warranty does not cover internal failures due to the user’s fault, so do not disassemble it without special need. The network already has a huge variety of all kinds of bullying over this device. That in liquid nitrogen is dipped, then the machine moves. Honestly, it’s not that much and I want to sway in the trash of the modes, so I will limit myself to water procedures and falls at home.
Let’s start with the test with water. He put it for 20 minutes in the basin. This will be enough to check how it behaves in the rain, when falling in a puddle, a fountain or other not deep accumulations of water. The battery is inside, the device is turned on.

At the end of the bath we observe an unpleasant picture – the water got into the interior, but this did not affect the working capacity. In the battery compartment nothing stranger penetrated.

Analysis of Geekvape Aegis Mod occupation is not simple. The glossy panel is held on a double-sided tape. Fears were in vain – a drop of water accumulated on a protective plastic plate.

Go ahead. This plate is in turn fastened to a silicone sealant. It tore even harder. There are no traces of moisture on the board. It can be concluded that the presence of water under the front panel is not a verdict. The more often in attacks of paranoia will disassemble the mode after immersion in water, the higher the probability of depressurization of the shell.

After that, he dropped a dozen times, imitating the various situations in which this is possible. There are no deformations on the body of the tracks. Yes, laminate is not asphalt, but on the same crash tests from the network of deplorable consequences, too, was not.

Comparison of dimensions and fitting

Snowwolf 200C, Geekvape Aegis, LostVape Therion 166.

IJOY Combro RDTA II, VGOD RDTA RII, SMOK TFV8 Big Baby.

Geekvape Aegis 100W TC Box Mod
Conclusion
Pros:
Protection against falls, dust and water
Quality board
Brutal appearance in the compartment with comfortable ergonomics
Use with batteries 26650 and 18650
The solid connector. It is able to place almost any atoms on itself.

Minuses:
Not the most ideal assembly
Rubber inserts are instantly spoiled
Lack of charging through box-box
Water can still penetrate into the body

In the previous review from greed811 boxmode, after getting moisture, did not turn on. I did not have such a problem. Because we are dealing with the miracle of the Chinese industry and everyone is familiar with their floating manufacturing quality, do not put grandiose hopes that this device will survive 100%. A certain share of the probability of a lamentable outcome is still present. However, despite this, there are simply no alternatives to Aegis. With it, you can go fishing, hunting, dusty plant / garage, camping, and any other place without fear of dropping it into the water, dirt, on the asphalt or trite not to worry about the leaked liquid from the atom. We can only hope that the trend for the protected devices will be picked up by all manufacturers and this will be an integral part of each new product. Rusty is where. For example, to rid the microUSB port of a ton of stubs in the same way as in smartphones.
Thanks to all.

The Geekvape Aegis Mod is provided for writing a review by the store. The review was published in accordance with paragraph 18 of the Site Rules.

Best Seller:
buy electronic cigarette online
ijoy Genie PD270
Nicomore M1
smoant charon ts 218w

A palm size kit – Vaporesso Swag 80w Kit

Vaporesso Swag 80w Kit consists of the modernly designed swag mod and the NRG SE Tank. Vaporesso Swag mod adopted progressive IML generation. It is powered by means of unmarried high-rate 18650 battery and the most output may be reached to 80W to carry you excellent vaping enjoy. With upgradable Omni 2.0 chip, the Vaporesso SWAG capabilities 2A fast charging, and support VT, TC, VW, Smart modes. The NRG SE Tank by Vaporesso inherited the Twist Open design, smooth adjustable bottom air flow from the NRG family. As a Special Edition, it is now 22mm wide, perfectly matching the new Swag Mod. It supports 3.5 ml e-juice capability, with twist open design and CCELL coils to provide exquisite flavors. NRG SE Tank features adjustable backside air drift.

Vaporesso Swag 80w Kit
vaporesso swag 80w mod features:
Mod Size: 75mm x 48mm x 25mm
Weight: 99 g
Power Range: 5-80 W
Display: 0.91″ OLED
Suitable Atomizer: 0.05 – 5 ohm
Voltage Range: 0-8.5V
Temperature Range: 100℃-315℃/200F-600F
Output Modes: VW(H/N/S), CCW, CCT, VT(NI,TI,SS), TCR(M1,M2), RTC, BYPASS
Battery Cell: 1x Lithium 18650 (not included)
Casting: Aluminum Alloy
Thread: 510 thread
Four different colors: Sliver, Orange, Blue, Black

NRG SE Tank features:
Material: Stainless Steel
Size: 22 x 48.5mm
Weight: 46g
Capacity: 3.5ml
Coil: 0.4ohm GT2 coil

Vaporesso Swag 80w with NRG SE Kit comes with
1 * SWAG Mod
1 * GT2 Core (Pre-installed)
1 * User Manual
1 * NRG SE Tank
1 * Vaporesso USB Cable
1 * GT CCELL (Extra)
1 * Replacement Glass Tube

To buy such a palm Vaporesso Swag 80w Kit, you can go on Urvapin. You will get nice price! Best service! Fast reply! What are you waiting for? Hurry up!

Strong Recommend:
cheap vape deals
smoant charon ts 218 mod
asvape michael mod
snowwolf vfeng 230w

IJOY Genie PD270 and Captain PD270

Ijoy released a new box mod–the IJOY Genie PD270 box mod, a new box mod which follows up the hottest set from IJOY, the captain PD270 mod. It is said that the IJOY Genie PD270 box mod comes with colors of the lights in the mod which featuring integrating a lightning-shaped potentiometer adjustment knob with simplistic LED indicator. It looks like the captain PD270 and the zenith had a baby. In his post, the advertised is Genie, Genie, make a wish! What’s your wish? The IJOY Genie Battery Mod will become the brightest light in the starry sky! The IJOY Genie PD270 box mod can fire up to 234W max wattage through powered by dual 20700 cells. Comes with quad magnetic back battery access door, replace batteries are very easy. There are 5 color options for the lights (red, blue, green, white and colorful) and 2 customize RGB color settings which can be programmed for different styles with digital color separation techniques. There is a LED flashlight control button on the battery door which supports the device used as a flashlight. The USB port charging also supports firmware upgradeable.

ijoy genie pd270
ijoy captain pd270 mod

While the Ijoy Captain PD270 is the first massed produced dual 20700 battery mod. Rated at 234 watts. It has a simple yet fashion accents of its design. The 20700 battery is much larger in size than the ubiquitous 18650 that we have come to know and love. Larger size generally means larger performance. It’s claimed that the iJoy 20700 batteries has a continuous discharge rate of 40A and a pulse rate of 85A with a 3000mAh capacity. Regardless of what batteries you use, the Captain PD270 is regulated by the IWEPAL chip which you control via the side-mounted buttons and OLED, much like the Smok Alien. The large square screen provides just about every detail of your vaping stats and settings, including wattage, resistance, amperage, battery life, mode (power, TC, TCR) and puff count.

If IJOY Genie PD270 and IJOY Captain PD270, you can only choose one, which one would you prefer? You don’t have to struggle with this question. Both of them are available on Urvapin. Go and choose one you like.

Related Recommend:
buy electronic cigarette online
wismec rx gen3
vapemen steam engine
SMOK 220W OSUB King Mod

Sigelei MT 220W kit with revolvr tank

We have to admit that most of us love the futuristic concept Sigelei MT 220W very much as its “cage” factor look, Led lights and practical applications. It’s not for fans of minimalistic designs! This is an attention grabbing, sci-fi looking mod with 220 watts of power and up to 570F of heat for TC. Following the Kaos Spectrum and the Vfeng Snow Wolf, it is “all in” on the LED lights. It has 4 color options for the mod frame, each of which have contrasting colors with the two battery tubes. As for the function, the stainless steel battery tube is quality built. The fire button is shaped like the transformer logo with 2 LED “eyes”. The Sigelei Revolvr is packed with the perfect punch of flavor, while still achieving peak cloud production. Additionally, the Revolvr is designed with a spacious top-fill refill system with enough space for any juice dispensing system. The transparent front panel makes it very easy to see the inside board, especially when the LED lights up. It also makes a visual impact on people. Besides, the super heat dissipation function and simple operation make Sigelei MT 220W more appropriate and enjoyable for your vaping experience.

sigelei mt kit

Sigelei MT 220W kit with revolvr tank Features & Spec:
Material: zinc alloy + stainless steel
Screen: 1.0〞TFT color screen
Wattage range: 10W-220W
Temperature range: 100℃-300℃/200℉-570℉
Voltage input: 6.4V-8.4V
Voltage output: 1.0V-7.5V
Maximum current: 38A
Support battery model: 2*18650
Working modes : POWER/SS316/SS317/TiI/NI200/TCR
Resistance range: 0.05Ω-3.0Ω
Coils supporting: Nickel chrome / stainless steel 316 / stainless steel 317 / nickel 200 / TCR / titanium
Support USB charging :DC 5V/2.5A
Transparent front panel, easy to see the inside components especially when the LED lights up
Fire button comes with 2 red LED lights
Exposed stainless steel battery tube brings visual impact
Built-in customized adjustable LED lights

Sigelei MT 220W kit with revolvr tank Package:
1 * Sigelei MT Mod (Battery not included)
1 * Revolvr Tank
1 * USB Cable
1 * User Manual
1 * Guarantee Card

Sigelei MT 220W kit with revolvr tank is available for pre-order now on Urvapin.

Strong Recommend:

buy electronic cigarette online
justfog p16a
asvape michael mod
snowwolf vfeng

Puff Avatar RS 75W DNA TC Mod

Puff Avatar RS 75W DNA TC Mod, a single-18650 powered device equipped with Evolv’s world famous upgradeable DNA chipset. The Puff Avatar RS 75W DNA TC Mod can put out 75 watts of raw power to satisfy the overwhelming majority of vapers out there. Yes, the Evolv DNA chip is fantastic, yes the device is loaded with features and technology that can fly you to the moon but Puff being an Italian company, they did not stop there. On the contrary, it is apparent they pushed the envelope as hard as possible and went to absolute extremes to achieve visual appeal like no other. Without any exaggeration, we can easily and rightfully say the Puff AVATAR RS DNA 75W boasts one of the most attractive outer designs in the vaping world, bar none.

Puff AVATAR RS DNA 75W features:
Equipped with the official Evolv DNA 75 chipset
1W – 75W output
30A maximum continuous output
Firmware upgradable
Compatible with Escribe
Full temperature control capability
Supports Ni200 nickel, titanium and stainless steel
Extra settings configured with Escribe
Temperature range between 93°C – 315°C (200°F – 600°F)
Body equipped with grooved LED lights
White, yellow, green, blue, orange, purple and red
Controlled by a dedicated button to turn on/off and change color
LED lights fire up each time the fire button is pressed
LED lights do not use a lot of power
Works with a single 18650 battery
Threaded battery door at the bottom
2.3cm (0.91″) OLED screen
Displays all essential data in a neat and easily readable format
The display can be adjusted through EScribe
Gold-plated, spring loaded 510 connector

EScribe software
Can configure the device by applying changes to the chipset
Micro USB port
Max. 1A charging
Also used for firmware and software upgrades
Dimensions: 49mm * 28mm * 92mm
Comes with an authenticity check code

Top class in performance and style – often claimed, rarely true but it definitely applies here. The vape – 100%. The look – 100%. The social magnet factor – beyond measure! For more option of the Puff AVATAR RS DNA 75W, appreciate you to check more surprise on Urvapin, this new items with Innovation must earn a good market, do not hesitated, hurry to check! The preorder will end on August 8, 2017.

Best Seller:
electronic cigarette
ijoy captain pd270
smok stick v8
tesla terminator

SMOK GX350 TC Kit Review

Today, let’s take a look at the SMOK GX350 starter kit, with powerful and small size, works with 4x 18650 high-amp batteries of a maximum wattage output of 350 Watts. Along with TFV8 Cloud Beast Tank that make you enjoy fantastic clouds.

smok gx350
When I first receive the GX350, I was so impressed and surprise. It’s pretty small mod powered by 4 batteries and is strong powerful mod by SMOK. The GX350 box mod measures 58mm x 40.4mm x 84.5mm, Tridimensional polygon design features with curved streamline and aircraft carrier appearance that fits nicely in the palm of my hand. It is much smaller than the Wismec Reuleaux RX300 quad 18650 300 watt mod, while larger than SMOK Alien 220. At the top of the box, we can see the 510 spring-loaded connector and a screen of OLED.We can check for the vaping information by the bright OLED screen and adjust by pressing “+” “-“. On the side of the box, there is a Micro USB port by a rubber cap to prevent internal damage, which supports firmware upgrading and charging.

smok gx350
And the exit of battery, we can see that ridimensional polygon design has shortened the perimeter to 155mm, although it can carry 4 x 18650 batteries by the small space. We can open the battery chamber by grip the two sides of the battery cover and direct pull. The mod kit allows to use quad 18650 batteries and boasts up to 350W of power. Supports VW/TC mods, offers temperature control that allows you to range from 200-600 degrees.

TFV8 Cloud Beast Tank can hold up to 6ml of e-juice and top-refilled, adjustable dual bottom airflow and a drelin drip tip. Utilizes 4 unique patented Turbo Engines coil structure: V8-T8 (6.6T), V8-T6 (6.0T), V8-Q4 (5.0T), V8 RBA (4.0T-X), which will completely changing your vaping experience.

The SMOK GX350 Kit has an attractive and ergonomic design with contours that makes it perfect to hold in hand as well as aesthetically pleasing. Powered by quad batteries with strongest power reach 350watts, match with the cloud beast TFV8 sub ohm tank, which will bring vapers fantastic cloud and amazing vaping experience. I think it would be one of the popular powerful starter kit with strongest output for 2017, you can’t miss it!

Best Seller:
buy electronic cigarette online
tesla 120w box mod
Coil Master DIY Kit V3
Smok Vape Pen 22