Lost Vape Mirage DNA75C Mod Review

Lost Vape has been delivering some of the very best mods integrating the Evolv DNA chip for some time, and the Mirage looks like another exceptionally designed box.

The Lost Vape Mirage DNA75C Mod is a box mod designed to be compatible with a single high drain 18650, 20700 and 21700 (converter included) battery and can fire up to 100W Max using the latter two. Its manufactured with rounded ends with a colourful resin finish at the rear and also rumors of a wood body material replacing the resin soon.

The Mirage features the Evolv DNA75 Color chip inside which incorporates a power regulated digital switch-mode and Evolv’s patented Wattage Control, Temperature Protection, Preheat, a full-color TFT screen, Reverse Polarity Protection, an onboard programmable multicolor LED, waterproof buttons and a real-time clock.

Specs & Features

Specs:

Evolv DNA75C Board with upgradable firmware
Theme Designer Software/Customizable User Interface
Onboard Programmable Multicolor LED
Stainless Steel 510 Atomizer Connector
Anodized Aluminum Frame and Top
Boost/Preheat 100 Watts Power
Integrated 1Amp On-board Balanced Charger
Flip-Open Battery Sled
Single 18650/20700/21700 Convertible

Size: 43.5mm x 28mm x 93mm
Temperature Limit: 200F – 600F
Output Power: 1 – 75 Watts
Power: 100W
Resin Color: Green Agate/Red Blaze
Frame Color: Dark Grey/Black

Urvapin’s Easter Sale is coming,10% off with coupon code: Easter,just cheack the link: https://www.urvapin.com/easter

Strong Recommend:
Smoant S8 Pod Starter Kit
Wismec Luxotic NC Dual 20700 Kit
Vaporesso ORCA Solo Kit

Boxer of electronic cigarette Geekvape AEGIS

Today I would like to tell you about the boxmode, which has no analogues at the moment. The main advantage of brutal Geekvape Aegis Mod from Geekvape is protection from water, dust, dirt, falls according to IP67 standards and MIL STD 810G-516.6.

Under the cut we will examine it from all sides, we will dip it in water and throw it. All interested are welcome.

Information for those who do not want to see reviews of electronic cigarettes in their own tape: in the upper right corner of the page click on “Settings”. Next, go to the “Display of materials” page. In the window that opens, mark “Electronic cigarettes” and click on the “save settings” button. After the done actions, you will no longer see unpleasant material.

Packaging

Supplied in a box of cardboard.

On the reverse side description and scratch code for checking originality.

The kit consists of: a boxman, instructions, o-rings, a cap for the usb port, screws and an adapter under 18650. There is also a version with a 26650 battery.

Appearance
Height – 88 mm
Width – 46.8 mm
Thickness – 37.8 mm
Weight – 202 grams

Available in four colors. Only the metal frame and the leather insert differ.

It is made of zinc alloy and aluminum. The first thing you pay attention to, after opening the box, is the smell of cheap Chinese shoes. On the first day he even interrupted the taste of the liquid. The build quality leaves much to be desired. There are superfluous cracks and inconsistencies of some decorative elements. The rubber insert on most of the device is just some kind of horror. She is constantly in mud and nap. Clean only happens in the first minutes after washing under running water. Looking at the promo photos on the Internet, I expected to get a three-hundred-foot brick, but in reality the mod was very convenient to use. In the hand lies like a poured. But that’s how it is too big for a single battery. However, for the sake of security, something must be sacrificed.

On the front side are:
The button “Fire”. The click is distinct, pleasant and not loud. The button itself sits tight and does not stagger.
0.96 “display.It is especially worth noting that in the off state it completely merges with the entire front glossy plastic panel.This is not often found.
The “±” buttons. But their click is heard from another room. Are located somehow very close to each other. Sometimes you can accidentally press both. Also not rattling.

On the back there is supposedly a leather insert with a stitching a la LG G4.

The name of the manufacturer is engraved on the side. Two torx screws hold the metal frame.

The opposite side is completely analogous to the previous one, only here is the engraving of the name of the device.

On top is a solid steel connector with a brass or gold-plated spring-loaded pin. It did not succeed in deforming it with various atoms. Connector platform can accommodate an atomizer, probably of any diameter.

Nearby is a microUSB-port for firmware device. It is covered with a silicone plug and a metal cover, which is fixed with two torx screws. Screwdriver in the set did not come up. Built-in charging is not. Although, with such a hemorrhoids access to the microUSB-port it is there to see it and would not want to.

At the bottom of the box, the battery compartment cover.

To extract it, you need to raise the lamb and, in fact, unscrew it.

On the inside of the lid there is an o-ring.

Threads of high quality. Problems with twisting / unwinding, as it happens in the modes with a similar solution, no.

Inside the compartment, mark the correct location of the battery.

Eats Aegis either from one battery 26650, or from 18650 with the help of a complete adapter.

Geekvape Aegis 100W TC Box Mod
Card Features
Power Rating: 100W
Max. Voltage: 9V ± 0.1V
Operating temperature range: -40 ° C to 80 ° C
Battery discharge up to 3.3V ± 0.1V
Thermal control on nickel, steel, titanium and TCR
Supported resistance range: Power and Bypass – 0.05 – 3 Ω / TC-NI – 0.05 – 0.8 Ω / TC-SS – 0.05 – 1.65 Ω / TC-TI – 0.05 – 1.1 Ω
Temperature range in TC mode: 100 ° C – 300 ° C / 200 ° F – 600 ° F

Earlier I did not encounter boxmodes from Geekvape and the first acquaintance left a positive impression. I did not see any flaws in the quality of the work. According to the manufacturer, the delay is minuscule 0.015 seconds. Whether it triggers autosuggestion, whether the start of the roast is really instant. Unfortunately, the board does not have a wide range of options. Navigation in the menu is convenient. By pressing the “Fire” three times, the modes change, and once – change the parameters. From the third-party settings, only the brightness adjustment of the display is available and the “±” buttons are locked. And about the modes, of which 7, now briefly tell.

Power – varivatt. The screen displays power, battery indicator, resistance, current strength, voltage and number of puffs / time of the last tightening. In the varivatta device without problems copes with the winding of 0.09 Ohm. The resistance of the coil changes only during tightening. On DNA, for example, that in idle time, that at the moment of tightening, the actual resistance of the build is always displayed. You can lock it and reset it, after which the mod will fix the current resistance. Cut-off after 10 seconds.
TC-NI / TC-SS / TC-TI – Thermal control on nickel, steel and titanium. The same settings are available as in the previous mode. You can not adjust the TCR.
TCR – and here already the temperature coefficient is adjusted.
VPC – heating curve. Available 5 divisions in 1 second increments. During tightening, the point on the graph moves in accordance with the previously set power. The transition from one division to another is smooth.
Bypass – Mehmode mode. You can also lock and drop resistance.

Crash test

Geekvape Aegis Box mod, as you already read in the cap, is protected by the standards of MIL STD 810G-516.6 and IP67, which means resistance to short-term immersion in water, protection against ingress of dust into the body and painless drops from a small height without any consequences. The warranty does not cover internal failures due to the user’s fault, so do not disassemble it without special need. The network already has a huge variety of all kinds of bullying over this device. That in liquid nitrogen is dipped, then the machine moves. Honestly, it’s not that much and I want to sway in the trash of the modes, so I will limit myself to water procedures and falls at home.
Let’s start with the test with water. He put it for 20 minutes in the basin. This will be enough to check how it behaves in the rain, when falling in a puddle, a fountain or other not deep accumulations of water. The battery is inside, the device is turned on.

At the end of the bath we observe an unpleasant picture – the water got into the interior, but this did not affect the working capacity. In the battery compartment nothing stranger penetrated.

Analysis of Geekvape Aegis Mod occupation is not simple. The glossy panel is held on a double-sided tape. Fears were in vain – a drop of water accumulated on a protective plastic plate.

Go ahead. This plate is in turn fastened to a silicone sealant. It tore even harder. There are no traces of moisture on the board. It can be concluded that the presence of water under the front panel is not a verdict. The more often in attacks of paranoia will disassemble the mode after immersion in water, the higher the probability of depressurization of the shell.

After that, he dropped a dozen times, imitating the various situations in which this is possible. There are no deformations on the body of the tracks. Yes, laminate is not asphalt, but on the same crash tests from the network of deplorable consequences, too, was not.

Comparison of dimensions and fitting

Snowwolf 200C, Geekvape Aegis, LostVape Therion 166.

IJOY Combro RDTA II, VGOD RDTA RII, SMOK TFV8 Big Baby.

Geekvape Aegis 100W TC Box Mod
Conclusion
Pros:
Protection against falls, dust and water
Quality board
Brutal appearance in the compartment with comfortable ergonomics
Use with batteries 26650 and 18650
The solid connector. It is able to place almost any atoms on itself.

Minuses:
Not the most ideal assembly
Rubber inserts are instantly spoiled
Lack of charging through box-box
Water can still penetrate into the body

In the previous review from greed811 boxmode, after getting moisture, did not turn on. I did not have such a problem. Because we are dealing with the miracle of the Chinese industry and everyone is familiar with their floating manufacturing quality, do not put grandiose hopes that this device will survive 100%. A certain share of the probability of a lamentable outcome is still present. However, despite this, there are simply no alternatives to Aegis. With it, you can go fishing, hunting, dusty plant / garage, camping, and any other place without fear of dropping it into the water, dirt, on the asphalt or trite not to worry about the leaked liquid from the atom. We can only hope that the trend for the protected devices will be picked up by all manufacturers and this will be an integral part of each new product. Rusty is where. For example, to rid the microUSB port of a ton of stubs in the same way as in smartphones.
Thanks to all.

The Geekvape Aegis Mod is provided for writing a review by the store. The review was published in accordance with paragraph 18 of the Site Rules.

Best Seller:
buy electronic cigarette online
ijoy Genie PD270
Nicomore M1
smoant charon ts 218w

A palm size kit – Vaporesso Swag 80w Kit

Vaporesso Swag 80w Kit consists of the modernly designed swag mod and the NRG SE Tank. Vaporesso Swag mod adopted progressive IML generation. It is powered by means of unmarried high-rate 18650 battery and the most output may be reached to 80W to carry you excellent vaping enjoy. With upgradable Omni 2.0 chip, the Vaporesso SWAG capabilities 2A fast charging, and support VT, TC, VW, Smart modes. The NRG SE Tank by Vaporesso inherited the Twist Open design, smooth adjustable bottom air flow from the NRG family. As a Special Edition, it is now 22mm wide, perfectly matching the new Swag Mod. It supports 3.5 ml e-juice capability, with twist open design and CCELL coils to provide exquisite flavors. NRG SE Tank features adjustable backside air drift.

Vaporesso Swag 80w Kit
vaporesso swag 80w mod features:
Mod Size: 75mm x 48mm x 25mm
Weight: 99 g
Power Range: 5-80 W
Display: 0.91″ OLED
Suitable Atomizer: 0.05 – 5 ohm
Voltage Range: 0-8.5V
Temperature Range: 100℃-315℃/200F-600F
Output Modes: VW(H/N/S), CCW, CCT, VT(NI,TI,SS), TCR(M1,M2), RTC, BYPASS
Battery Cell: 1x Lithium 18650 (not included)
Casting: Aluminum Alloy
Thread: 510 thread
Four different colors: Sliver, Orange, Blue, Black

NRG SE Tank features:
Material: Stainless Steel
Size: 22 x 48.5mm
Weight: 46g
Capacity: 3.5ml
Coil: 0.4ohm GT2 coil

Vaporesso Swag 80w with NRG SE Kit comes with
1 * SWAG Mod
1 * GT2 Core (Pre-installed)
1 * User Manual
1 * NRG SE Tank
1 * Vaporesso USB Cable
1 * GT CCELL (Extra)
1 * Replacement Glass Tube

To buy such a palm Vaporesso Swag 80w Kit, you can go on Urvapin. You will get nice price! Best service! Fast reply! What are you waiting for? Hurry up!

Strong Recommend:
cheap vape deals
smoant charon ts 218 mod
asvape michael mod
snowwolf vfeng 230w

IJOY Genie PD270 and Captain PD270

Ijoy released a new box mod–the IJOY Genie PD270 box mod, a new box mod which follows up the hottest set from IJOY, the captain PD270 mod. It is said that the IJOY Genie PD270 box mod comes with colors of the lights in the mod which featuring integrating a lightning-shaped potentiometer adjustment knob with simplistic LED indicator. It looks like the captain PD270 and the zenith had a baby. In his post, the advertised is Genie, Genie, make a wish! What’s your wish? The IJOY Genie Battery Mod will become the brightest light in the starry sky! The IJOY Genie PD270 box mod can fire up to 234W max wattage through powered by dual 20700 cells. Comes with quad magnetic back battery access door, replace batteries are very easy. There are 5 color options for the lights (red, blue, green, white and colorful) and 2 customize RGB color settings which can be programmed for different styles with digital color separation techniques. There is a LED flashlight control button on the battery door which supports the device used as a flashlight. The USB port charging also supports firmware upgradeable.

ijoy genie pd270
ijoy captain pd270 mod

While the Ijoy Captain PD270 is the first massed produced dual 20700 battery mod. Rated at 234 watts. It has a simple yet fashion accents of its design. The 20700 battery is much larger in size than the ubiquitous 18650 that we have come to know and love. Larger size generally means larger performance. It’s claimed that the iJoy 20700 batteries has a continuous discharge rate of 40A and a pulse rate of 85A with a 3000mAh capacity. Regardless of what batteries you use, the Captain PD270 is regulated by the IWEPAL chip which you control via the side-mounted buttons and OLED, much like the Smok Alien. The large square screen provides just about every detail of your vaping stats and settings, including wattage, resistance, amperage, battery life, mode (power, TC, TCR) and puff count.

If IJOY Genie PD270 and IJOY Captain PD270, you can only choose one, which one would you prefer? You don’t have to struggle with this question. Both of them are available on Urvapin. Go and choose one you like.

Related Recommend:
buy electronic cigarette online
wismec rx gen3
vapemen steam engine
SMOK 220W OSUB King Mod

Sigelei Compak F1 Kit

The Sigelei Compak F1 Kit is an all-in-one setup features a 40W output, a 2ml tank capacity, LED indicators, e-liquid windows and an integrated battery with fast micro USB charging. This is a small, AIO vape setup that combines a durable zinc alloy chassis with a 2000 mAh battery for a top vaping performance in the lower wattage outputs.

With dimensions of just 28mm x 54.5mm x 90.50mm, this Sigelei Compak F1 Kit can be easily stored in a purse and is pocket friendly. Available colors for this kit include silver/black, red/black, white/black and all black. The chassis is made from zinc alloy and a rubber-oil firing button/grip results in ideal ergonomics. An internal tank has a 2ml e-juice capacity, is easily refilled and its e-liquid level can be monitored via convenient viewing windows. The atomizer/tank are easily removed for replacement and are made with durable materials. There’s also a dust cap stored on the bottom of the kit for cleaning and to ensure maximum hygiene.

An internal battery with a 2000mAh capacity for long vaping times powers the Compak F1. The built-in cell is recharged via a micro USB port that features a quick 2A current to quickly finish the charging process.

The Sigelei Compak F1 Kit works in power mode and has a maximum output of 40 watts, a maximum input voltage of 4.2 volts and fires with a resistance of 0.3ohm. An LED indicator light is used to monitor battery levels and also lights up during mod use.

Sigelei Compak F1 Kit
Features and Specifications
Measurements: 28mm x 54.5mm x 90.50mm
Made from zinc alloy
Rubber oil grip/fire button
Ergonomic and easily transported
Oversized fire button
Colors: white/black, black, red/black, silver/black
Dust cap to keep clean
Easy atomizer/tank replacement
Tank capacity: 2ml
E-liquid viewing windows
LED indicator light
Internal 2000mAh battery
Micro USB fast charging at 2A/5V
Operating modes: power
Power mode output range: 25W to 40W
Input voltage range: 3.2V to 4.2V
Replacement coil included
USB cable included
User manual
Warranty card

Great for on the go use or for the beginner vaper, this small sized, light weight Sigelei Compak F1 Kit is fantastic for traveling! Hurry up! Go on Urvapin to preorder one now!

Related Recommend:
buy electronic cigarette online
smok t priv
wismec rx gen3
SMOK Stick X8 Kit

Sigelei Compak F1 40W Kit 2000mAh

The Sigelei Compak F1 Kit, the latest starter kit from Sigelei is a compact device that brings together tough, durable zinc alloy materials and a 2000 mAh battery so you can achieve high performance vaping with lower wattage output. The Sigelei Compak F1 Kit features a 40W output, a 2ml tank capacity, LED indicators, e-liquid windows and a integrated battery with fast micro USB charging. The chassis is made from zinc alloy and a rubber-oil firing button/grip results in ideal ergonomics. An internal tank has a 2ml e-juice capacity, is easily refilled and its e-liquid level can be monitored via convenient viewing windows. The atomizer/tank are easily removed for replacement and are made with durable materials. There’s also a dust cap stored on the bottom of the kit for cleaning and to ensure maximum hygiene.
This Sigelei Compak F1 Kit is perfectly pocket-sized and an excellent addition to the low powered vaping category.

sigelei compak f1 kit

Features
Elegant design with different color options
Large firing button
Small durable shape with a comfortable feel
Rubber-oil material creates an ideal feel in your hand
Easy to view liquid through the 2 side windows
The atomizer can be easily removed which is very convenient and durable
The dust cap is stored under the device as a hygienic and clean tool

Parameters
Material:Zinc alloy
Wattage range:25W-40W
Working mode: Power mode
Battery capacity: 2000mAh(internal battery)
Resistance: 0.3Ω
Tank capacity:2.0ml
Charging support(USB):5V/2A

Package Included
1 * Compak F1 Mod
1 * Tank
1 * Replacement coil
1 * USB cable
1 * User manual
1 * Warranty card

This Urvapin. You can preorder one.

Strong Recommend:
cheap vape deals
justfog p16a
asvape michael mod
snowwolf vfeng

ijoy captain pd270 kit review

The chimney-shaped IJOY Captain PD270 KIT utilizes the 20700 battery platform and has a 234W TC chipset from IWEPAL will surely stir up a new enthusiasm and attract huge crowds once it is launched. IJOY Captain PD270 kit is also still preferred by many vapers for its unique and appealing design. It is a good news for travelers as they can go anywhere with this little device and enjoy a pleasing and exquisite vaping experience. With respect to its color, there are 3 body colors and 18 different skins for you to choose based on your personal style.

It is noted that this IJOY Captain PD270 box mod firstly holds dual 20700 batteries and compatible with 18650 batteries, which provides slightly better and performance than other similar products. That is to say, you can charge your device via upgrading USB ports or installing two batteries when the small device runs out of power.
This IJOY Captain PD270 kit is equipped with clear and bright display screen, and it is readable in the sunlight and shows some useful information to users for like wattage, temperature control. Users also can keep track of all these data to prevent some potential risks according to the kit’s status quos.
ijoy captain pd270 234w kit

IJOY Captain PD270 mod focuses on unique custom user mode, so some intelligent device is armed with this mod (cool GUL) to meet many people’s requirements. The cool GUL falls into several parts, including power mode, standby time mod, TCRM /TCRM2 set, NI/TI/SS/M1/M2/Exit and reset the puff counter. All these stunning functions will maximize the comfort of the experience. It still supports max 234W and resistance range of 0.05~3.0 ohm. It also has a gold-plated 510 connector that can blends seamlessly into the tank.

IJOY Captain PD270 kit atomizer is divided into a few parts, such as delrin drip tip, top cap, pyrex tube, coil head and chamber. You can choose one color among 10 finished colors. As for the drip tip or mouthpiece, it is wide so that it can deliver a massive clouds of vaping. It utilizes the sliding top fill system to avoid oil leakage like Eleaf iCare 2 Starter Atomizer, and you can fill the e-liquid into the tank with ease. It is stressed that IJOY Captain PD270 kit has a large and groove chassis so that it can house a large battery and reduce heat transfer to deliver smoothest airflow and the most pleasure taste.
The tank is paired with a pyrelx tube which can resist the heat. Inside the tank section, there is a cute and blizzard chamber. This e-cigarette tank can accommodate up 4ml of e-juice so that you can vape all day. With a no thread coil, the tank can be easily detached. Additionally, the coil has a sole C2 and C3 system that is suitable for high VG e- juice.
The IJOY Captain PD270 KIT is an excellent choice for all vapers. Good news is that you can preorder it now on Urvapin. Hurry up! Don’t hesitate.

Best Seller:

cheap vape deals
osub 80w baby
asvape michael mod
snowwolf vfeng